Pressure range: Positive pressure -0.1~1 MPa, negative pressure 0~-101.3 kPa, continuous pressure: -100.0~100 kPa, adjustable tolerance, high precision, multiple pressure units available.

MP20/25

pressure sensor

pressure sensor

MP41

Directly installable on a three-point assembly, 3-color pressure display, adjustable differential pressure, high precision, low price, pressure units can be set: MPa, kgf/cm2, bar, psi

MP43

7 pressure unit displays. 2 NPN/PNP open-collector outputs + analog output. 3-color digital LCD display. Repeatability ±0.2% FS ±1 digit. Maximum power saving of 20%.

pressure sensor

  • Double guide rod pneumatic cylinder
  • Three-rod pneumatic cylinder
  • Twin-shaft force multiplier cylinder

Blocking/Lifting/Push-out Type - Double Guide Rod Pneumatic Cylinder

MCCA

Types: 03-Blocking type/sliding bearing cylinder, 13-Lifting type/linear ball bearing, 53-Lifting type/sliding bearing, 23-Push-out type/linear ball bearing, 63-Push-out type/sliding bearing; Inner diameter: φ20~80 (mm). Various options are available to suit different applications. The connecting blocks at the guide rod end are classified into two types: columnar connecting blocks (for blocking type) and platform connecting blocks (for lifting type).

Mini double-guide rod pneumatic cylinder

MCGB

Cylinder inner diameter: φ12~32(mm). This space-saving and easy-to-install product was designed for maximum practicality. Piping can be installed from two sides. Three mounting options are available. Four grooves are provided for mounting embedded sensors.

Double guide rod pneumatic cylinder

MCGS

Cylinder inner diameter: φ6~32(mm), embedded sensor groove.

Thin double-guide rod pneumatic cylinder

MCGI

Lifting type/sliding bearing, cylinder inner diameter: φ20~80(mm), the piston rod is pulled and pushed by air, and precise operation can be achieved through the action of double guide rods.

Thin double-guide rod pneumatic cylinder

MCGJ

Cylinder inner diameter: φ12~100 (mm). Air-driven piston rod performs pull and push functions, and precise operation is achieved through the action of double guide rods. Depending on actual needs, 2 to 6 sensors can be installed. The piston rod is made of hard chrome-plated steel or stainless steel.

Double guide rod pneumatic cylinder

MGT

Model: MGTK / MGTX / MGTB / MGTU; Cylinder inner diameter: φ20~63 (mm); The guide rod cylinder is a combination of the cylinder and peripheral equipment, providing excellent resistance to rotation, torque, and lateral loads. It saves considerable time in mechanism design, drawing, and installation, and has a simple structure. Cylinders with diameters from φ32 to φ63 use embedded sensors; embedded sensor mounting grooves are designed on all four sides of the cylinder tube, allowing the sensor installation position to be changed according to actual usage requirements.

Double guide rod slide pneumatic cylinder

MCGD

Cylinder inner diameter: φ12~32 (mm). Customers can install it using either a "connecting block fixation" or "body fixation" method. It features four recessed grooves for easy sensor installation. Depending on the required accuracy, the guide rod bearing section is available with either a "flat sliding bearing" or a "linear ball bearing".

Page 1 of 1