Pressure range: Positive pressure -0.1~1 MPa, negative pressure 0~-101.3 kPa, continuous pressure: -100.0~100 kPa, adjustable tolerance, high precision, multiple pressure units available.

MP20/25

pressure sensor

pressure sensor

MP41

Directly installable on a three-point assembly, 3-color pressure display, adjustable differential pressure, high precision, low price, pressure units can be set: MPa, kgf/cm2, bar, psi

MP43

7 pressure unit displays. 2 NPN/PNP open-collector outputs + analog output. 3-color digital LCD display. Repeatability ±0.2% FS ±1 digit. Maximum power saving of 20%.

pressure sensor

  • Rotary pneumatic cylinder
  • Miniature rotary pneumatic cylinder

Rotary pneumatic cylinder

BN-6R

Cylinder inner diameter: φ30, 50 (mm). A dual-piston actuation system is employed to achieve high torque transmission. To realize the design concept of high precision and high load resistance, the bearing section adopts an interlocking thrust roller bearing combination and a robust gear shaft. It can be combined with the three-rod pneumatic cylinders—MCG3 series and BN-6D series—for automatic rotary lifting applications.

Rotary pneumatic cylinder

MCRA

Cylinder inner diameter: φ63 mm; overall dimensions are smaller than previous models. Simplified and functional design. Sensor position can be easily adjusted using the rail-mounted slot.

Rotary pneumatic cylinder

MCRB

Cylinder inner diameter: φ16, 20, 25, 32 (mm), driven by a dual-cylinder mechanism and a rack-and-pinion rotation drive. The rotation angle can be adjusted significantly (0°~190°) and three mounting methods are available. The sensor position can be easily adjusted by using a rail-shaped groove for mounting.

Rotary pneumatic cylinder

MCRD

Cylinder inner diameter: 10, 15, 20, 30, 40 mm; single-blade; piping diameter: M3×0.5, M5×0.8; operating pressure range: 0.15~1 MPa; maximum pressure resistance: 1.5 MPa.

Rotary pneumatic cylinder

MCRQ

Cylinder inner diameter: φ15, 20, 25, 32, 40 (mm), with accurate positioning ensured by using a center positioning hole and a reference hole. The angle range is 0° to 190°, controlled by an angle adjusting bolt on the work platform. The internal design utilizes a double rack and a single gear connected to generate rotational motion.

Rotary pneumatic cylinder

MCRQ-S

Cylinder inner diameter: φ15, φ20, φ25 (mm), rotation angle: 90°, 180°, allows 4 to 10 times more kinetic energy (compared to internal buffer type), shortened overall length: longitudinal installation space is reduced because there are no protruding adjusting bolts or internal buffers.

Rotary pneumatic cylinder

MRT

Cylinder inner diameter: φ40, 63, 80 (mm). This series of rotary cylinders features an attractive design, excellent performance, and high torque. All models are equipped with sensors and angle adjustment devices.

Page 1 of 1