sensor

RDGV

RDGV (contactless), RNGV (contactless NPN), RPGV (contactless PNP), applicable cylinder models: MCFB, MCGS

wire connector

M83 / M84

M83: M8, 3PIN / M84: M8, 4PIN; R: Straight / RL: 90°; Wire material: PVC / PUR

MVSC/D series

MVSD1-180

The body is 18mm wide, with 5 ports for 2 positions and 5 ports for 3 positions. The pipe diameter is Rc1/8, and it is a straight pipe type. The maximum operating pressure is 0.7 MPa, and the flow rate is 400~533 Nl/min.

Intelligent electric cylinder

MEAT

Specifications: 25. Reduced mounting base to slide plane dimensions save space. Utilizes a stepper motor with minimum pitch timing belt drive for improved displacement accuracy. Four linear ball bearings support the slide load, maintaining stability and smooth operation. The servo-type stepper motor has a built-in controller with program memory function.

electric cylinder

METB

Dimensions: 42x42, 55x55, 80x80 mm. Belt-driven with linear guide rail. Constructed of aluminum alloy. Uses stainless steel sealing to prevent damage to the internal belt and linear guide rail from dust and dirt.

Endpoint locking device

MCMBL

Cylinder inner diameter: φ40 (mm), made of oil-impregnated alloy with special bearing bushings, eliminating the need for lubrication of the piston rod. The pneumatic cylinder is made of high-grade stainless steel, offering enhanced wear and corrosion resistance. A variety of brackets are available.

Flow control valve

MSC

Model: MSC100 / 200 / 300 / 400 / 500, Fluid used: Air, Operating pressure range: 0~1 MPa, Pressure resistance: 1.5 MPa

MVSN series

MVSN-220

The body is 22mm wide, with 5 ports and 2 positions, a maximum operating pressure of 0.7 MPa, and a flow rate of 799 Nl/min.

Double guide rod pneumatic cylinder

MCGS

Cylinder inner diameter: φ6~32(mm), embedded sensor groove.

Thin pneumatic cylinder

MCJI

Cylinder inner diameter: φ20~80 (mm), designed to conform to ISO 21287 standard. During cylinder extrusion, a pre-drilled mounting groove is provided on the outer perimeter, making sensor installation, fixing, and position adjustment extremely simple. The RCI sensor is fixed to the body without protruding or taking up space. All models are magnetic.